NAVIGATION
ARTICLE
DOOM 3 BFG Cvars
| Name | Description |
|---|---|
| aa_targetAdhesionContributionPctMax | Max Adhesion Contribution Percentage - Range 0.0 - 1.0 |
| aa_targetAdhesionEnable | Enables Target Adhesion |
| aa_targetAdhesionPitchSpeedMax | Max Pitch Adhesion Speed |
| aa_targetAdhesionPlayerSpeedThreshold | Speed Threshold that determines how fast the player needs to move before adhesion is allowed to kick in |
| aa_targetAdhesionRadius | Radius used to apply adhesion amount |
| aa_targetAdhesionYawSpeedMax | Max Yaw Adhesion Speed |
| aa_targetAimAssistEnable | Enables/Disables the entire Aim Assist system |
| aa_targetFrictionEnable | Enables Target Friction |
| aa_targetFrictionMaxDistance | Minimum Distance Friction takes effect |
| aa_targetFrictionMultiplierMax | Maximum Friction Scalar |
| aa_targetFrictionMultiplierMin | Minimum Friction Scalar |
| aa_targetFrictionOptimalDistance | Optimal Distance for Friction to take an effect |
| aa_targetFrictionOptimalRadius | Friction Collision Sphere Radius when at Optimal Distance |
| aa_targetFrictionRadius | Friction Collision Sphere Radius |
| aa_targetMaxDistance | The Maximum Distance away for a target to be considered for adhesion, friction and target lock-to |
| aa_targetSelectionRadius | Radius used to select targets for auto aiming |
| aas_goalArea | |
| aas_pullPlayer | |
| aas_randomPullPlayer | |
| aas_showAreas | |
| aas_showFlyPath | |
| aas_showHideArea | |
| aas_showPath | |
| aas_showPushIntoArea | |
| aas_showWallEdges | |
| aas_test | |
| achievements_Verbose | debug spam |
| actor_noDamage | actors don't take damage -- for testing |
| af_contactFrictionScale | scales the contact friction |
| af_forceFriction | force the given friction value |
| af_highlightBody | name of the body to highlight |
| af_highlightConstraint | name of the constraint to highlight |
| af_jointFrictionScale | scales the joint friction |
| af_maxAngularVelocity | maximum angular velocity |
| af_maxLinearVelocity | maximum linear velocity |
| af_showActive | show tree-like structures of articulated figures not at rest |
| af_showBodies | show bodies |
| af_showBodyNames | show body names |
| af_showConstrainedBodies | show the two bodies contrained by the highlighted constraint |
| af_showConstraintNames | show constraint names |
| af_showConstraints | show constraints |
| af_showInertia | show the inertia tensor of each body |
| af_showLimits | show joint limits |
| af_showMass | show the mass of each body |
| af_showPrimaryOnly | show primary constraints only |
| af_showTimings | show articulated figure cpu usage |
| af_showTotalMass | show the total mass of each articulated figure |
| af_showTrees | show tree-like structures |
| af_showVelocity | show the velocity of each body |
| af_skipFriction | skip friction |
| af_skipLimits | skip joint limits |
| af_skipSelfCollision | skip self collision detection |
| af_testSolid | test for bodies initially stuck in solid |
| af_timeScale | scales the time |
| af_useImpulseFriction | use impulse based contact friction |
| af_useJointImpulseFriction | use impulse based joint friction |
| af_useLinearTime | use linear time algorithm for tree-like structures |
| af_useSymmetry | use constraint matrix symmetry |
| ai_blockedFailSafe | enable blocked fail safe handling |
| ai_debugMove | draws movement information for monsters |
| ai_debugScript | displays script calls for the specified monster entity number |
| ai_debugTrajectory | draws trajectory tests for monsters |
| ai_showCombatNodes | draws attack cones for monsters |
| ai_showHealth | Draws the AI's health above its head |
| ai_showObstacleAvoidance | draws obstacle avoidance information for monsters. if 2, draws obstacles for player, as well |
| ai_showPaths | draws path_* entities |
| ai_testPredictPath | |
| ai_think | for testing.. |
| bearTurretAngle | |
| bearTurretForce | |
| binaryLoadAnim | enable binary load/write of idMD5Anim |
| binaryLoadParticles | enable binary load/write of particle decls |
| cg_predictedSpawn_debug | Debug predictive spawning of presentables |
| cg_projectile_clientAuthoritative_maxCatchup | |
| cm_backFaceCull | cull back facing polygons |
| cm_debugCollision | debug the collision detection |
| cm_drawColor | color used to draw the collision models |
| cm_drawFilled | draw filled polygons |
| cm_drawInternal | draw internal edges green |
| cm_drawMask | collision mask |
| cm_drawNormals | draw polygon and edge normals |
| cm_testAngle | |
| cm_testBox | |
| cm_testBoxRotation | |
| cm_testCollision | |
| cm_testLength | |
| cm_testModel | |
| cm_testOrigin | |
| cm_testRadius | |
| cm_testRandomMany | |
| cm_testReset | |
| cm_testRotation | |
| cm_testTimes | |
| cm_testWalk | |
| com_allowConsole | allow toggling console with the tilde key |
| com_assertOutOfDebugger | by default, do not assert while not running under the debugger |
| com_aviDemoHeight | |
| com_aviDemoSamples | |
| com_aviDemoWidth | |
| com_deltaTimeClamp | don't process more than this time in a single frame |
| com_deviceZeroOverride | change input routing for device 0 to poll a different device |
| com_disableAllSaves | |
| com_disableAutoSaves | |
| com_engineHz | Frames per second the engine runs at |
| com_fixedTic | run a single game frame per render frame |
| com_forceGenericSIMD | force generic platform independent SIMD |
| com_forceLatestSnap | |
| com_japaneseCensorship | Enable Japanese censorship |
| com_noSleep | don't sleep if the game is running too fast |
| com_printFilter | only print lines that contain this, add multiple filters with a ; delimeter |
| com_product_lang_ext | Extension to use when creating language files. |
| com_productionMode | 0 - no special behavior, 1 - building a production build, 2 - running a production build |
| com_requireNonProductionSignIn | If true, will require sign in, even on non production builds. |
| com_showFPS | show frames rendered per second |
| com_showMemoryUsage | show total and per frame memory usage |
| com_skipGameDraw | |
| com_skipIntroVideos | skips intro videos |
| com_sleepDraw | intentionally add a sleep in the draw time |
| com_sleepGame | intentionally add a sleep in the game time |
| com_sleepRender | intentionally add a sleep in the render time |
| com_smp | run the game and draw code in a separate thread |
| com_speeds | show engine timings |
| com_timestampPrints | print time with each console print, 1 = msec, 2 = sec |
| com_updateLoadSize | update the load size after loading a map |
| com_wipeSeconds | |
| developer | developer mode |
| dialog_saveClearLevel | Time required to show long message |
| flashlight_batteryChargeTimeMS | amount of time (in MS) it takes to fully recharge battery |
| flashlight_batteryDrainTimeMS | amount of time (in MS) it takes for full battery to drain (-1 == no battery drain) |
| flashlight_batteryFlickerPercent | chance of flickering when battery is low |
| flashlight_minActivatePercent | ( 0.0 - 1.0 ) minimum amount of battery (%) needed to turn on flashlight |
| fs_basepath | |
| fs_enableBackgroundCaching | if 1 allow the 360 to precache game files in the background |
| fs_resourceLoadPriority | if 1, open requests will be honored from resource files first; if 0, the resource files are checked after normal search paths |
| fs_savepath | |
| g_armorProtection | armor takes this percentage of damage |
| g_armorProtectionMP | armor takes this percentage of damage in mp |
| g_blobSize | |
| g_blobTime | |
| g_bloodEffects | show blood splats, sprays and gibs |
| g_checkpoints | Enable/Disable checkpoints |
| g_cinematic | skips updating entities that aren't marked 'cinematic' '1' during cinematics |
| g_cinematicMaxSkipTime | # of seconds to allow game to run when skipping cinematic. prevents lock-up when cinematic doesn't end. |
| g_clientFire_checkLineOfSightDebug | |
| g_countDown | pregame countdown in seconds |
| g_CTFArrows | draw arrows over teammates in CTF |
| g_damageScale | scale final damage on player by this factor |
| g_debugAnim | displays information on which animations are playing on the specified entity number. set to -1 to disable. |
| g_debugBounds | checks for models with bounds > 2048 |
| g_debugCinematic | set to the name of the state you want to debug or * for all |
| g_debugDamage | |
| g_debugMove | |
| g_debugMover | |
| g_debugScript | |
| g_debugShockwave | Debug the shockwave |
| g_debugTriggers | |
| g_debugWeapon | |
| g_decals | show decals such as bullet holes |
| g_demoMode | this is a demo |
| g_disasm | disassemble script into base/script/disasm.txt on the local drive when script is compiled |
| g_dragDamping | |
| g_dragEntity | allows dragging physics objects around by placing the crosshair over them and holding the fire button |
| g_dragShowSelection | |
| g_dropItemRotation | |
| g_dvAmplitude | |
| g_dvFrequency | |
| g_dvTime | |
| g_editEntityMode | 0 = off\n1 = lights\n2 = sounds\n3 = articulated figures\n4 = particle systems\n5 = monsters\n6 = entity names\n7 = entity models |
| g_enablePortalSky | enables the portal sky |
| g_enableSlowmo | for testing purposes only |
| g_flagAttachAngleX | X angle of CTF flag when carried |
| g_flagAttachAngleY | Y angle of CTF flag when carried |
| g_flagAttachAngleZ | Z angle of CTF flag when carried |
| g_flagAttachJoint | player joint to attach CTF flag to |
| g_flagAttachOffsetX | X offset of CTF flag when carried |
| g_flagAttachOffsetY | Y offset of CTF flag when carried |
| g_flagAttachOffsetZ | Z offset of CTF flag when carried |
| g_flushSave | 1 = don't buffer file writing for save games. |
| g_fov | |
| g_frametime | displays timing information for each game frame |
| g_gameReviewPause | scores review time in seconds (at end game) |
| g_grabberDamping | damping of grabber |
| g_grabberEnableShake | enable the grabber shake |
| g_grabberHardStop | hard stops object if too fast |
| g_grabberHoldSeconds | number of seconds to hold object |
| g_grabberRandomMotion | enable random motion on the grabbed object |
| g_gravity | singleplayer gravity |
| g_gunScale | |
| g_gunX | |
| g_gunY | |
| g_gunZ | |
| g_healthTakeAmt | how much health to take in nightmare mode |
| g_healthTakeLimit | how low can health get taken in nightmare mode |
| g_healthTakeTime | how often to take health in nightmare mode |
| g_infiniteAmmo | infinite ammo |
| g_kickAmplitude | |
| g_kickTime | |
| g_knockback | |
| g_laserSightLength | laser sight beam length |
| g_laserSightWidth | laser sight beam width |
| g_leNightmare | if nightmare mode is allowed for le |
| g_maxShowDistance | Distance at which to draw clipmodels and clipworld - Will significantly hurt performance at values above 512 |
| g_monsters | |
| g_moveableDamageScale | scales damage wrt mass of object in multiplayer |
| g_mpWeaponAngleScale | Control the weapon sway in MP |
| g_muzzleFlash | show muzzle flashes |
| g_nightmare | if nightmare mode is allowed |
| g_projectileDebug | Debug projectiles |
| g_projectileLights | show dynamic lights on projectiles |
| g_recordSaveGameTrace | |
| g_recordTrace | |
| g_roeNightmare | if nightmare mode is allowed for roe |
| g_showActiveEntities | draws boxes around thinking entities. dormant entities (outside of pvs) are drawn yellow. non-dormant are green. |
| g_showBrass | enables ejected shells from weapon |
| g_showcamerainfo | displays the current frame # for the camera when playing cinematics |
| g_showCollisionModels | 0 = off, 1 = draw collision models, 2 = only draw player collision models. g_maxShowDistance controls distance. |
| g_showCollisionTraces | |
| g_showCollisionWorld | |
| g_showEnemies | draws boxes around monsters that have targeted the the player |
| g_showEntityInfo | |
| g_showHud | |
| g_showPlayerShadow | enables shadow of player model |
| g_showProjectilePct | enables display of player hit percentage |
| g_showPVS | |
| g_showTargets | draws entities and thier targets. hidden entities are drawn grey. |
| g_showTestModelFrame | displays the current animation and frame # for testmodels |
| g_showTriggers | draws trigger entities (orange) and thier targets (green). disabled triggers are drawn grey. |
| g_showviewpos | |
| g_skill | difficulty level |
| g_skipFX | |
| g_skipViewEffects | skip damage and other view effects |
| g_slowmoStepRate | |
| g_spectatorChat | let spectators talk to everyone during game |
| g_stopTime | |
| g_testBloomIntensity | |
| g_testBloomNumPasses | |
| g_testDeath | |
| g_testFullscreenFX | index will activate specific fx, -2 is for all on, -1 is off |
| g_testHealthVision | |
| g_testHelltimeFX | set to 0, 1, 2 to test helltime, -1 is off |
| g_testModelAnimate | test model animation,\n0 = cycle anim with origin reset\n1 = cycle anim with fixed origin\n2 = cycle anim with continuous origin\n3 = frame by frame with |
| g_testModelBlend | number of frames to blend |
| g_testModelRotate | test model rotation speed |
| g_testMultiplayerFX | set to 0, 1, 2 to test multiplayer, -1 is off |
| g_testParticle | test particle visualation, set by the particle editor |
| g_testParticleName | name of the particle being tested by the particle editor |
| g_testPostProcess | name of material to draw over screen |
| g_timeEntities | when non-zero, shows entities whose think functions exceeded the # of milliseconds specified |
| g_useDynamicProtection | scale damage and armor dynamically to keep the player alive more often |
| g_useNewGuiCode | use optimized device context code, 2 = toggle on/off every frame |
| g_useOldPDAStrings | Read strings from the .pda files rather than from the .lang file |
| g_useWeaponDepthHack | Crunch z depth on weapons |
| g_vehicleDebug | print out vehicle physics debug info |
| g_vehicleForce | |
| g_vehicleSuspensionDamping | |
| g_vehicleSuspensionDown | |
| g_vehicleSuspensionKCompress | |
| g_vehicleSuspensionUp | |
| g_vehicleTireFriction | |
| g_vehicleVelocity | |
| g_viewNodalX | |
| g_viewNodalZ | |
| g_weaponShadows | Cast shadows from weapons |
| g_xp_bind_run_once | Rebind all controls once for D3XP. |
| gamedate | |
| gamename | |
| hud_titlesafe | fraction of the screen to leave around hud for titlesafe area |
| ik_debug | show IK debug lines |
| ik_enable | enable IK |
| image_highQualityCompression | Use high quality (slow) compression |
| in_alwaysRun | always run (reverse _speed button) - only in MP |
| in_invertLook | inverts the look controls so the forward looks up (flight controls) - the proper way to play games! |
| in_joystickRumble | enable joystick rumble |
| in_mouseInvertLook | inverts the look controls so the forward looks up (flight controls) - the proper way to play games! |
| in_mouseSpeed | speed at which the mouse moves |
| in_useJoystick | enables/disables the gamepad for PC use |
| jobs_longJobMicroSec | print a warning for jobs that take more than this number of microseconds |
| jobs_numThreads | number of threads used to crunch through jobs |
| jobs_prioritize | prioritize job lists |
| joy_dampenLook | Do not allow full acceleration on look |
| joy_deadZone | specifies how large the dead-zone is on the joystick |
| joy_deltaPerMSLook | Max amount to be added on look per MS |
| joy_gammaLook | use a log curve instead of a power curve for movement |
| joy_mergedThreshold | If the thresholds aren't merged, you drift more off center |
| joy_newCode | Use the new codepath |
| joy_pitchSpeed | pitch speed when pressing up or down on the joystick |
| joy_powerScale | Raise joystick values to this power |
| joy_range | allow full range to be mapped to a smaller offset |
| joy_triggerThreshold | how far the joystick triggers have to be pressed before they register as down |
| joy_yawSpeed | pitch speed when pressing left or right on the joystick |
| lang_maskLocalizedStrings | Masks all localized strings to help debugging. When set will replace strings with an equal length of W's and ending in an X. Note: The masking occurs at string |
| lcp_showFailures | show LCP solver failures |
| logfile | 1 = buffer log, 2 = flush after each print |
| logFileName | name of log file, if empty, qconsole.log will be used |
| memcpyImpl | Which implementation of memcpy to use for idFile_Memory::Write() [0/1 - standard (1 eliminates branch misprediction), 2 - auto-vectorized] |
| mp_bot_input_override | Override local input routing for bot control |
| net_allowCheats | Allow cheats in multiplayer |
| net_bw_challenge_enable | Enable pre game bandwidth challenge for throttling snap rate |
| net_bw_test_host_timeout | How long host will wait in MS to hear bw results from peers |
| net_bw_test_interval | MS - how often to send packets in bandwidth test |
| net_bw_test_numPackets | Number of bandwidth challenge packets to send |
| net_bw_test_packetSizeBytes | Size of each packet to send out |
| net_bw_test_throttle_byte_pct | Min byte % a peer must match in bandwidth challenge before being throttled. 1.0=perfect (received everything) 0.0=Received nothing |
| net_bw_test_throttle_rate_pct | Min rate % a peer must match in bandwidth challenge before being throttled. 1.0=perfect, 0.0=received nothing |
| net_bw_test_throttle_seq_pct | Min sequence % a peer must match in bandwidth test before being throttled. 1.0=perfect. This score will be more adversely affected by packet loss than byte % |
| net_bw_test_timeout | MS after receiving a bw test packet that client will time out |
| net_checkVersion | Check for matching version when clients connect. 0: normal rules, 1: force check, otherwise no check (pass always) |
| net_clientMaxPrediction | maximum number of milliseconds a client can predict ahead of server. |
| net_clientPredictGUI | test guis in networking without prediction |
| net_clientSelfSmoothing | smooth self position if network causes prediction error. |
| net_clientSmoothing | smooth other clients angles and position. |
| net_connectTimeoutInSeconds | timeout (in seconds) while connecting |
| net_debug_snapShotTime | |
| net_debugBaseStates | Log out base state information |
| net_debughud3_bps_max | Highest factor of server base snapRate that a client can be throttled |
| net_drawDebugHud | 0 = None, 1 = Hud 1, 2 = Hud 2, 3 = Snapshots |
| net_effectiveSnapRateDebug | Debug |
| net_effectiveSnapRateEnable | Dynamically adjust client snaprate |
| net_errorSmoothingDecay | Rate at which error smoothing decays (in percent per game frame) |
| net_errorSmoothingMaxDecay | Max rate at which origin error smoothing decays (in units per game frame) |
| net_forceDrop | percentage packet loss |
| net_forceDropSnap | wait on snaps |
| net_forceLatency | milliseconds latency |
| net_forceUpstream | Force a maximum upstream in kB/s (256kbps <-> 32kB/s) |
| net_forceUpstreamQueue | How much data is queued when enforcing upstream (in kB) |
| net_headlessServer | toggle to automatically host a game and allow peer[0] to control menus |
| net_ignoreConnects | Test as if no one can connect to me. 0 = off, 1 = ignore with no reply, 2 = send goodbye |
| net_ignoreTitleStorage | Ignore title storage |
| net_interpolationBaseRate | Scale interpolationg rate when we fall behind |
| net_interpolationCatchupRate | Scale interpolationg rate when we fall behind |
| net_interpolationFallbackRate | Scale interpolationg rate when we fall behind |
| net_interpolationSlowdownStart | Scale interpolation rate when we fall behind |
| net_inviteOnly | whether or not the private server you create allows friends to join or invite only |
| net_ip | local IP address |
| net_LobbyCoalesceTimeInSeconds | Time in seconds when a lobby will try to coalesce with another lobby when there is only one user. |
| net_LobbyRandomCoalesceTimeInSeconds | Random time to add to net_LobbyCoalesceTimeInSeconds |
| net_maxBufferedSnapMS | Max time to allow for interpolation cushion |
| net_maxExtrapolationInMS | Max time in MS that extrapolation is allowed to occur. |
| net_maxFailedPingRecoveries | Max failed ping recoveries before we stop trying |
| net_maxLoadResourcesTimeInSeconds | How long, in seconds, clients have to load resources. Used for loose asset builds. |
| net_maxRate | max send rate in kilobytes per second |
| net_maxSearchResults | Max results that are allowed to be returned in a search request |
| net_maxSearchResultsToTry | Max results to try before giving up. |
| net_migrateHost | Become host of session (0 = party, 1 = game) for testing purposes |
| net_migration_debug | debug |
| net_migration_disable | debug |
| net_migration_forcePeerAsHost | When set to >-1, it forces that peer number to be the new host during migration |
| net_min_ping_in_ms | Ping has to be higher than this before we consider throttling to recover |
| net_minBufferedSnapPCT_Static | Min amount of snapshot buffer time we want need to buffer |
| net_minBufferedSnapWinPCT_Static | Min amount of snapshot buffer time we want need to buffer |
| net_offlineTransitionThreshold | Time, in milliseconds, to wait before kicking back to the main menu when a profile losses backend connection during an online game |
| net_optimalDynamic | How fast to add to our optimal time buffer when we are playing snapshots faster than server is feeding them to us |
| net_optimalSnapDeltaSize | Optimal size of snapshot delta msgs. |
| net_optimalSnapTime | How fast to add to our optimal time buffer when we are playing snapshots faster than server is feeding them to us |
| net_optimalSnapWindow | |
| net_peer_throttle_bps_decay | If peer exceeds this number of queued snap deltas, then throttle his effective snap rate |
| net_peer_throttle_bps_duration | If peer exceeds this number of queued snap deltas, then throttle his effective snap rate |
| net_peer_throttle_bps_host_threshold | Min outgoing bps of host for bps based throttling to be considered |
| net_peer_throttle_bps_peer_threshold_pct | Min reported incoming bps % of sent from host that a peer must maintain before throttling kicks in |
| net_peer_throttle_maxSnapRate | Highest factor of server base snapRate that a client can be throttled |
| net_peer_throttle_minSnapSeq | Minumum number of snapshot exchanges before throttling can be triggered |
| net_peer_throttle_mode | = 0 off, 1 = enable fixed, 2 = absolute, 3 = both |
| net_peer_timeout_loading | time in MS to disconnect clients during loading - production only |
| net_peerTimeoutInSeconds | If the host hasn't received a response from a peer in this amount of time (in seconds), the peer will be disconnected. |
| net_peerTimeoutInSeconds_Lobby | If the host hasn't received a response from a peer in this amount of time (in seconds), the peer will be disconnected. |
| net_pingIncPercentBeforeRecover | Percentage change increase of ping before we try to recover |
| net_pingRecoveryThrottleTimeInSeconds | Throttle snaps for this amount of time in seconds to recover from ping spike |
| net_port | local IP port number |
| net_queueSnapAcks | |
| net_showReliableCompression | Show reliable compression ratio. |
| net_skipClientDeltaAppend | Simulate delta receive buffer overflowing |
| net_skipGoodbye | |
| net_snap_bw_test_throttle_max_scale | When clamping bandwidth to reported values, scale reported value by this |
| net_snap_redundant_resend_in_ms | Delay between redundantly sending snaps during initial snap exchange |
| net_snapRate | How many milliseconds between sending snapshots |
| net_snapshot_send_warntime | Print warning messages if we take longer than this to send a client a snapshot. |
| net_socksPassword | |
| net_socksPort | |
| net_socksServer | |
| net_socksUsername | |
| net_ssTemplateDebug | Debug snapshot template states |
| net_ssTemplateDebug_len | Offset to start template state debugging |
| net_ssTemplateDebug_start | length of template state to print in debugging |
| net_testPartyMemberConnectFail | Force this party member index to fail to connect to games. |
| net_ucmdRate | How many milliseconds between sending usercmds |
| net_useGameStateLobby | |
| net_usercmd_timing_debug | Print messages about usercmd timing. |
| net_verbose | Print a bunch of message about the network session |
| net_verboseReliable | Prints the more spammy messages about reliable network msgs |
| net_verboseResource | Prints a bunch of message about network resources |
| net_verboseSimulatedTraffic | Print some stats about simulated traffic (net_force* cvars) |
| net_verboseSnapshot | Verbose snapshot code to help debug snapshot problems. Greater the number greater the spam |
| net_verboseSnapshotCompression | Verbose snapshot code to help debug snapshot problems. Greater the number greater the spam |
| net_verboseSnapshotReport | Verbose snapshot code to help debug snapshot problems. Greater the number greater the spam |
| net_verifyReliableQueue | 0: warn only, 1: error, 2: fixup, 3: fixup and verbose, 4: force test |
| player_allowScreenFXInStereo | allow full screen fx in stereo mode |
| pm_air | how long in milliseconds the player can go without air before he starts taking damage |
| pm_bboxwidth | x/y size of player's bounding box |
| pm_bobpitch | |
| pm_bobroll | |
| pm_bobup | |
| pm_clientAuthoritative_debug | |
| pm_clientAuthoritative_Divergence | |
| pm_clientAuthoritative_Lerp | |
| pm_clientAuthoritative_minDist | |
| pm_clientAuthoritative_minDistZ | |
| pm_clientAuthoritative_minSpeedSquared | |
| pm_clientAuthoritative_warnDist | |
| pm_clientInterpolation_Divergence | |
| pm_controllerShake_damageMaxDur | |
| pm_controllerShake_damageMaxMag | |
| pm_crouchbob | bob much faster when crouched |
| pm_crouchheight | height of player's bounding box while crouched |
| pm_crouchrate | time it takes for player's view to change from standing to crouching |
| pm_crouchspeed | speed the player can move while crouched |
| pm_crouchviewheight | height of player's view while crouched |
| pm_deadheight | height of player's bounding box while dead |
| pm_deadviewheight | height of player's view while dead |
| pm_jumpheight | approximate hieght the player can jump |
| pm_maxviewpitch | amount player's view can look down |
| pm_minviewpitch | amount player's view can look up (negative values are up) |
| pm_modelView | draws camera from POV of player model (1 = always, 2 = when dead) |
| pm_noclipspeed | speed the player can move while in noclip |
| pm_normalheight | height of player's bounding box while standing |
| pm_normalviewheight | height of player's view while standing |
| pm_runbob | bob faster when running |
| pm_runpitch | |
| pm_runroll | |
| pm_runspeed | speed the player can move while running |
| pm_spectatebbox | size of the spectator bounding box |
| pm_spectatespeed | speed the player can move while spectating |
| pm_stamina | length of time player can run |
| pm_staminarate | rate that player regains stamina. divide pm_stamina by this value to determine how long it takes to fully recharge. |
| pm_staminathreshold | when stamina drops below this value, player gradually slows to a walk |
| pm_stepsize | maximum height the player can step up without jumping |
| pm_thirdPerson | enables third person view |
| pm_thirdPersonAngle | direction of camera from player in 3rd person in degrees (0 = behind player, 180 = in front) |
| pm_thirdPersonClip | clip third person view into world space |
| pm_thirdPersonDeath | enables third person view when player dies |
| pm_thirdPersonHeight | height of camera from normal view height in 3rd person |
| pm_thirdPersonRange | camera distance from player in 3rd person |
| pm_usecylinder | use a cylinder approximation instead of a bounding box for player collision detection |
| pm_walkbob | bob slowly when walking |
| pm_walkspeed | speed the player can move while walking |
| popupDialog_debug | display debug spam |
| preLoad_Collision | preload collision beginlevelload |
| preload_CommonAssets | preload common assets |
| preLoad_Images | preload images during beginlevelload |
| preload_MapModels | preload models during begin or end levelload |
| preLoad_Samples | preload samples during beginlevelload |
| profile_verbose | Turns on debug spam for profiles |
| r_binaryLoadRenderModels | enable binary load/write of render models |
| r_brightness | changes gamma tables |
| r_centerX | projection matrix center adjust |
| r_centerY | projection matrix center adjust |
| r_checkBounds | compare all surface bounds with precalculated ones |
| r_clear | force screen clear every frame, 1 = purple, 2 = black, 'r g b' = custom |
| r_cullDynamicLightTriangles | cull surface triangles that are outside the light frustum so they do not get rendered for interactions |
| r_cullDynamicShadowTriangles | cull occluder triangles that are outside the light frustum so they do not contribute to the dynamic shadow volume |
| r_customheight | custom screen height. set r_mode to -1 to activate |
| r_customwidth | custom screen width. set r_mode to -1 to activate |
| r_debugArrowStep | step size of arrow cone line rotation in degrees |
| r_debugContext | Enable various levels of context debug. |
| r_debugLineDepthTest | perform depth test on debug lines |
| r_debugLineWidth | width of debug lines |
| r_debugPolygonFilled | draw a filled polygon |
| r_debugRenderToTexture | |
| r_displayRefresh | optional display refresh rate option for vid mode |
| r_drawEyeColor | Draw a colored box, red = left eye, blue = right eye, grey = non-stereo |
| r_drawFlickerBox | visual test for dropping frames |
| r_flareSize | scale the flare deforms from the material def |
| r_forceScreenWidthCentimeters | Override screen width returned by hardware |
| r_forceShadowCaps | 0 = skip rendering shadow caps if view is outside shadow volume, 1 = always render shadow caps |
| r_forceSoundOpAmplitude | Don't call into the sound system for amplitudes |
| r_forceZPassStencilShadows | force Z-pass rendering for performance testing |
| r_fullscreen | 0 = windowed, 1 = full screen |
| r_gamma | changes gamma tables |
| r_glDriver | \"opengl32\", etc. |
| r_ignoreGLErrors | ignore GL errors |
| r_jitter | randomly subpixel jitter the projection matrix |
| r_jointNameOffset | offset of joint names when r_showskel is set to 1 |
| r_jointNameScale | size of joint names when r_showskel is set to 1 |
| r_lightAllBackFaces | light all the back faces, even when they would be shadowed |
| r_lightScale | all light intensities are multiplied by this |
| r_lodbias | image lod bias |
| r_logFile | number of frames to emit GL logs |
| r_logLevel | 1 = blocks only, 2 = everything |
| r_materialOverride | overrides all materials |
| r_maxAnisotropicFiltering | limit aniso filtering |
| r_motionBlur | 1 - 5, log2 of the number of motion blur samples |
| r_multiSamples | number of antialiasing samples |
| r_offsetfactor | polygon offset parameter |
| r_offsetunits | polygon offset parameter |
| r_orderIndexes | perform index reorganization to optimize vertex use |
| r_pix | print GPU/CPU event timing |
| r_requestStereoPixelFormat | Ask for a stereo GL pixel format on startup |
| r_screenFraction | for testing fill rate, the resolution of the entire screen can be changed |
| r_shadowPolygonFactor | scale value for stencil shadow drawing |
| r_shadowPolygonOffset | bias value added to depth test for stencil shadow drawing |
| r_showAddModel | report stats from tr_addModel |
| r_showBuffers | |
| r_showCenterOfProjection | Draw a cross to show the center of projection |
| r_showCull | report sphere and box culling stats |
| r_showDemo | report reads and writes to the demo file |
| r_showDepth | display the contents of the depth buffer and the depth range |
| r_showDominantTri | draw lines from vertexes to center of dominant triangles |
| r_showDynamic | report stats on dynamic surface generation |
| r_showEdges | draw the sil edges |
| r_showIntensity | draw the screen colors based on intensity, red = 0, green = 128, blue = 255 |
| r_showLightCount | 1 = colors surfaces based on light count, 2 = also count everything through walls, 3 = also print overdraw |
| r_showLights | 1 = just print volumes numbers, highlighting ones covering the view, 2 = also draw planes of each volume, 3 = also draw edges of each volume |
| r_showLightScissors | show light scissor rectangles |
| r_showLines | 1 = draw alternate horizontal lines, 2 = draw alternate vertical lines |
| r_showMemory | print frame memory utilization |
| r_shownormals | draws wireframe normals |
| r_showOverDraw | 1 = geometry overdraw, 2 = light interaction overdraw, 3 = geometry and light interaction overdraw |
| r_showPortals | draw portal outlines in color based on passed / not passed |
| r_showPrimitives | report drawsurf/index/vertex counts |
| r_showShadows | 1 = visualize the stencil shadow volumes, 2 = draw filled in |
| r_showSilhouette | highlight edges that are casting shadow planes |
| r_showSkel | draw the skeleton when model animates, 1 = draw model with skeleton, 2 = draw skeleton only |
| r_showSurfaceInfo | show surface material name under crosshair |
| r_showSurfaces | report surface/light/shadow counts |
| r_showSwapBuffers | Show timings from GL_BlockingSwapBuffers |
| r_showTangentSpace | shade triangles by tangent space, 1 = use 1st tangent vector, 2 = use 2nd tangent vector, 3 = use normal vector |
| r_showTexturePolarity | shade triangles by texture area polarity |
| r_showTextureVectors | if > 0 draw each triangles texture (tangent) vectors |
| r_showTrace | show the intersection of an eye trace with the world |
| r_showtris | enables wireframe rendering of the world, 1 = only draw visible ones, 2 = draw all front facing, 3 = draw all |
| r_showUnsmoothedTangents | if 1, put all nvidia register combiner programming in display lists |
| r_showUpdates | report entity and light updates and ref counts |
| r_showVertexCache | Print stats about the vertex cache every frame |
| r_showVertexColor | draws all triangles with the solid vertex color |
| r_showViewEntitys | 1 = displays the bounding boxes of all view models, 2 = print index numbers |
| r_singleArea | only draw the portal area the view is actually in |
| r_singleEntity | suppress all but one entity |
| r_singleLight | suppress all but one light |
| r_singleSurface | suppress all but one surface on each entity |
| r_singleTriangle | only draw a single triangle per primitive |
| r_skipAmbient | bypasses all non-interaction drawing |
| r_skipBackEnd | don't draw anything |
| r_skipBlendLights | skip all blend lights |
| r_skipBump | uses a flat surface instead of the bump map |
| r_skipCopyTexture | do all rendering, but don't actually copyTexSubImage2D |
| r_skipDecals | skip decal surfaces |
| r_skipDeforms | leave all deform materials in their original state |
| r_skipDiffuse | use black for diffuse |
| r_skipDynamicInteractions | skip interactions created after level load |
| r_skipDynamicShadows | skip dynamic shadows |
| r_skipDynamicTextures | don't dynamically create textures |
| r_skipFogLights | skip all fog lights |
| r_skipFrontEnd | bypasses all front end work, but 2D gui rendering still draws |
| r_skipGuiShaders | 1 = skip all gui elements on surfaces, 2 = skip drawing but still handle events, 3 = draw but skip events |
| r_skipIntelWorkarounds | skip workarounds for Intel driver bugs |
| r_skipInteractionFastPath | |
| r_skipInteractions | skip all light/surface interaction drawing |
| r_skipNewAmbient | bypasses all vertex/fragment program ambient drawing |
| r_skipOverlays | skip overlay surfaces |
| r_skipParticles | 1 = skip all particle systems |
| r_skipPostProcess | skip all post-process renderings |
| r_skipPrelightShadows | skip the dmap generated static shadow volumes |
| r_skipRender | skip 3D rendering, but pass 2D |
| r_skipRenderContext | NULL the rendering context during backend 3D rendering |
| r_skipShaderPasses | |
| r_skipShadows | disable shadows |
| r_skipSpecular | use black for specular1 |
| r_skipStaticInteractions | skip interactions created at level load |
| r_skipStaticShadows | skip static shadows |
| r_skipStripDeadCode | Skip stripping dead code |
| r_skipSubviews | 1 = don't render any gui elements on surfaces |
| r_skipSuppress | ignore the per-view suppressions |
| r_skipTranslucent | skip the translucent interaction rendering |
| r_skipUpdates | 1 = don't accept any entity or light updates, making everything static |
| r_subviewOnly | 1 = don't render main view, allowing subviews to be debugged |
| r_swapInterval | changes wglSwapIntarval |
| r_syncEveryFrame | Don't let the GPU buffer execution past swapbuffers |
| r_testGamma | if > 0 draw a grid pattern to test gamma levels |
| r_testGammaBias | if > 0 draw a grid pattern to test gamma levels |
| r_useAreasConnectedForShadowCulling | cull entities cut off by doors |
| r_useCachedDynamicModels | cache snapshots of dynamic models |
| r_useConstantMaterials | use pre-calculated material registers if possible |
| r_useEntityCallbacks | if 0, issue the callback immediately at update time, rather than defering |
| r_useEntityPortalCulling | 0 = none, 1 = cull frustum corners to plane, 2 = exact clip the frustum faces |
| r_useGPUSkinning | animate normals and tangents instead of deriving |
| r_useLightAreaCulling | 0 = off, 1 = on |
| r_useLightDepthBounds | use depth bounds test on lights to reduce both shadow and interaction fill |
| r_useLightPortalCulling | 0 = none, 1 = cull frustum corners to plane, 2 = exact clip the frustum faces |
| r_useLightPortalFlow | use a more precise area reference determination |
| r_useLightScissors | 1 = use custom scissor rectangle for each light |
| r_useLightStencilSelect | use stencil select pass |
| r_useNodeCommonChildren | stop pushing reference bounds early when possible |
| r_useOpenGL32 | 0 = OpenGL 2.0, 1 = OpenGL 3.2 compatibility profile, 2 = OpenGL 3.2 core profile |
| r_useParallelAddLights | aadd all lights in parallel with jobs |
| r_useParallelAddModels | add all models in parallel with jobs |
| r_useParallelAddShadows | 0 = off, 1 = threaded |
| r_usePortals | 1 = use portals to perform area culling, otherwise draw everything |
| r_useScissor | scissor clip as portals and lights are processed |
| r_useSeamlessCubeMap | use ARB_seamless_cube_map if available |
| r_useShadowDepthBounds | use depth bounds test on individual shadow volumes to reduce shadow fill |
| r_useShadowPreciseInsideTest | use a precise and more expensive test to determine whether the view is inside a shadow volume |
| r_useShadowSurfaceScissor | scissor shadows by the scissor rect of the interaction surfaces |
| r_useSilRemap | consider verts with the same XYZ, but different ST the same for shadows |
| r_useSRGB | 1 = both texture and framebuffer, 2 = framebuffer only, 3 = texture only |
| r_useStateCaching | avoid redundant state changes in GL_*() calls |
| r_useStencilShadowPreload | use stencil shadow preload algorithm instead of Z-fail |
| r_useTrilinearFiltering | Extra quality filtering |
| r_useUniformArrays | |
| r_useViewBypass | bypass a frame of latency to the view |
| r_vidMode | fullscreen video mode number |
| r_windowHeight | Non-fullscreen parameter |
| r_windowWidth | Non-fullscreen parameter |
| r_windowX | Non-fullscreen parameter |
| r_windowY | Non-fullscreen parameter |
| r_znear | near Z clip plane distance |
| rb_showActive | show rigid bodies that are not at rest |
| rb_showBodies | show rigid bodies |
| rb_showInertia | show the inertia tensor of each rigid body |
| rb_showMass | show the mass of each rigid body |
| rb_showTimings | show rigid body cpu usage |
| rb_showVelocity | show the velocity of each rigid body |
| rs_display | 0 - percentages, 1 - pixels per frame |
| rs_dropFraction | Drop the resolution in increments of this |
| rs_dropMilliseconds | Drop the resolution when GPU time exceeds this |
| rs_enable | Enable dynamic resolution scaling, 0 - off, 1 - horz only, 2 - vert only, 3 - both |
| rs_forceFractionX | Force a specific 0.0 to 1.0 horizontal resolution scale |
| rs_forceFractionY | Force a specific 0.0 to 1.0 vertical resolution scale |
| rs_raiseFraction | Raise the resolution in increments of this |
| rs_raiseFrames | Require this many frames below rs_raiseMilliseconds |
| rs_raiseMilliseconds | Raise the resolution when GPU time is below this for several frames |
| rs_showResolutionChanges | 1 = Print whenever the resolution scale changes, 2 = always |
| s_centerFractionVO | Portion of VO sounds routed to the center channel |
| s_constantAmplitude | |
| s_cushionFadeChannels | Ramp currentCushionDB so this many emitter channels should be silent |
| s_cushionFadeLimit | Never cushion fade beyond this level |
| s_cushionFadeOver | DB above s_cushionFadeLimit to start ramp to silence |
| s_cushionFadeRate | DB / second change to currentCushionDB |
| s_debugHardware | Print a message any time a hardware voice changes |
| s_device | Sound device to use. -1 for default device |
| s_doorDistanceAdd | reduce sound volume with this distance when going through a door |
| s_drawSounds | |
| s_lockListener | lock listener updates |
| s_maxEmitterChannels | Can be set lower than the absolute max of MAX_HARDWARE_VOICES |
| s_maxSamples | max samples to load per shader |
| s_meterPosition | VU meter location (x y w h) |
| s_meterTopTime | How long (in milliseconds) peaks are displayed on the VU meter |
| s_noSound | returns NULL for all sounds loaded and does not update the sound rendering |
| s_playDefaultSound | play a beep for missing sounds |
| s_showLevelMeter | Show VU meter |
| s_showPerfData | Show XAudio2 Performance data |
| s_showStartSound | print a message every time a sound starts/stops |
| s_showVoices | show active voices |
| s_singleEmitter | mute all sounds but this emitter |
| s_skipHardwareSets | Do all calculation, but skip XA2 calls |
| s_subFraction | Amount of each sound to send to the LFE channel |
| s_unpauseFadeInTime | When unpausing a sound world, milliseconds to fade sounds in over |
| s_useCompression | Use compressed sound files (mp3/xma) |
| s_useOcclusion | Attenuate sounds based on walls |
| s_volume_dB | volume in dB |
| saveGame_checksum | data integrity check |
| saveGame_enable | are savegames enabled |
| savegame_error | Combination of bits that will simulate and error, see 'savegamePrintErrors'. 0 = no error |
| saveGame_verbose | debug spam |
| savegame_winInduceDelay | on windows, this is a delay induced before any file operation occurs |
| sgf_checksums | enable save game file checksums |
| sgf_testCorruption | test corruption at the 128 kB compressed block |
| sgf_threads | 0 = all foreground, 1 = background write, 2 = background write + compress |
| sgf_windowBits | zlib window bits |
| si_flagDropTimeLimit | seconds before a dropped CTF flag is returned |
| si_fragLimit | frag limit |
| si_map | map to be played next on server |
| si_midnight | Start the game up in midnight CTF (completely dark) |
| si_mode | default mode choice for profile |
| si_pointlimit | team points limit to win in CTF |
| si_spectators | allow spectators or require all clients to play |
| si_splitscreen | force splitscreen |
| si_teamDamage | enable team damage |
| si_timeLimit | time limit in minutes |
| si_version | engine version |
| stereoRender_convergence | 0 = head mounted display, otherwise world units to convergence plane |
| stereoRender_defaultGuiDepth | Fraction of separation when not specified |
| stereoRender_deGhost | subtract from opposite eye to reduce ghosting |
| stereoRender_enable | 1 = side-by-side compressed, 2 = top and bottom compressed, 3 = side-by-side, 4 = 720 frame packed, 5 = interlaced, 6 = OpenGL quad buffer |
| stereoRender_interOccularCentimeters | Distance between eyes |
| stereoRender_swapEyes | reverse eye adjustments |
| stereoRender_warp | use the optical warping renderprog instead of stereoDeGhost |
| stereoRender_warpCenterX | center for left eye, right eye will be 1.0 - this |
| stereoRender_warpCenterY | center for both eyes |
| stereoRender_warpParmW | development parm |
| stereoRender_warpParmZ | development parm |
| stereoRender_warpStrength | amount of pre-distortion |
| stereoRender_warpTargetFraction | fraction of half-width the through-lens view covers |
| swf_debug | debug swf scripts. 1 shows traces/errors. 2 also shows warnings. 3 also shows disassembly. 4 shows parameters in the disassembly. |
| swf_debugInvoke | debug swf functions being called from game. |
| swf_debugShowAddress | shows addresses along with object types when they are serialized |
| swf_forceAlpha | force an alpha value on all elements, useful to show invisible animating elements |
| swf_loadBinary | used to set whether to load binary swf from generated |
| swf_stopat | stop at a specific frame |
| swf_subtitleEarlyTrans | early time out to switch the line |
| swf_subtitleExtraTime | time after subtitles vo is complete |
| swf_subtitleLengthGuess | early time out to switch the line |
| swf_textMaxInputLength | max number of characters that can go into the input line |
| swf_textParagraphInc | scroll speed for text |
| swf_textParagraphSpeed | scroll speed for text |
| swf_textRndLetterDelay | scroll speed for text |
| swf_textRndLetterSpeed | scroll speed for text |
| swf_textScrollSpeed | scroll speed for text |
| swf_textStrokeSize | size of font glyph stroke |
| swf_textStrokeSizeGlyphSpacer | additional space for spacing glyphs using stroke |
| swf_timescale | timescale for swf files |
| swf_titleSafe | space between UI elements and screen edge |
| sys_lang | |
| sys_showMallocs | |
| timescale | scales the time |
| ui_autoReload | auto reload weapon |
| ui_autoSwitch | auto switch weapon |
| ui_showGun | show gun |
| ui_skinIndex | Selected skin index |
| win_isInParty | debugging cvar for platform party status |
| win_partyCount | debugginc var for platform party count |
| win_userOnline | debugging cvar for profile online status |
| win_userPersistent | debugging cvar for profile persistence status |
| zip_avgSeekDistance | |
| zip_numSeeks | |
| zip_seeksBackward | |
| zip_seeksForward | |
| zip_skippedSeeks | |
| zip_verbosity | 1 = verbose logging when building zip files |
Last changed Sep 21, 2026
